R&S Hydraulics - Online Store

Home

Services

Photo Galleries

Online Store

Parts & Equipment

Lowering

Air Lock-Ups

Fabrication

Air Bags

Installation

Hydraulics

RS Hydraulics is your one - stop - shop for any & all of your hydraulic & air ride suspension related needs.

We are working to bring you a wide selection & price range. If you do not see what you are looking for here on our site please call our shop. We can acquire virtually any part, kit, service you seek.

RS also provides custom fabrication for cars, trucks, bikes & more.

Online Store - Hydraulic Kits, Parts & Accessories

Call our shop at (408) 971-9888 today for more information

Cyclone Kits

Cyclone 1 - Front

Description: The Cyclone has single pressure port on top of the
block and dual return ports on sides of the block with large pumphead. 1- CCE Cyclone Pump **Chrome** 1- 1/4 #6 #6 Tee 1- 8" Competition Cylinders (pair) 1- #6 #6 #6 Tee 1- #6 15ft. Hose 1- 3/8M to 3/8M Elbow 1- #6 4ft. Hose 1- 3/8M to #8 Swivel 1- #6 3ft. Hose 1- 3/8 Plug 2- #6 14" Return Hose 1- 3/8 to #6 Straight 1- Italian Dump 5- 3/8 to #6 Elbow 1- Standard Cup (pair) 1- 1/4M to 3/8M Straight 1- Donut (pair) 1- 3 Prong Switch 1- Parker 3/8" Female 13- CCE 9 Wire Switch Cord 1- Parker 1/4" Competition 3- Solenoids * Upgrades are Available *

Cyclone 1 - Rear

Description: The Cyclone has single pressure port on top of the
block and dual return ports on sides of the block with large pumphead. This One Pump "Rear" Cyclone Kit consists of:1- CCE Cyclone Pump **Chrome** 1- #6 #6 #6 Tee 1- 8" Competition Cylinders (pair) 1- 3/8M to 3/8M Elbow 1- #6 4ft. Hose 1- 3/8M to 3/8M Swivel 2- #6 3ft. Hose 1- 3/8 Plug 2- #6 14" Return Hose 1- 3/8 to #6 Straight 1- Italian Dump 5- 3/8 to #6 Elbow 1- Standard Cup (pair) 1- 1/4M to 3/8M Straight 1- Donut (pair) 1- 3 Prong Switch 1- Parker 3/8" Female 13- CCE 9 Wire Switch Cord 1- Parker 1/4" Competition 3- Solenoids 1- 1/4 #6 #6 Tee * Upgrades are Available *

Cyclone 2

This 2 Pump Cyclone Kit consists of: Description: The Cyclone has single pressure port on top of the
block and dual return ports on sides of the block with large pumphead. 2- CCE Cyclone Pumps **Chrome** 2- Donuts (pair) 2- 8" Competition Cylinders (pair) 4- Parker 3/8" Male 1- 10 Pre-wired Box 12- 3/8 to #6 Elbow 2- #6 15ft. Hose 4- 1/4M to 3/8M Straight 1- #6 4ft. Hose 2- 3/8M to 3/8F to 3/8F Tee 1- #6 3ft. Hose 4- Parker 1/4" Competition 4- #6 14" Return Hose 4- 1/4 to #6 Straight 4- Italian Dumps 6- Solenoids 2- Standard Cups (pair) * Upgrades are Available *

Cyclone 4

The 4 Pump Cyclone Kit consists of: Description: The Cyclone has single pressure port on top of the
block and dual return ports on sides of the block with large pumphead. 4- CCE Cyclone Pumps **Chrome** 4- Parker 1/4" Competition 2- 8" Competition Cylinders (pair) 4- 1/4 #6 #6 Tee 1- 10 Switch Pre-wired Box 4- 3/8 to #6 Elbow 2- #6 15ft. Hose 4- 3/8 Plug 1- #6 4ft. Hose 4- 3/8M to #8 Swivel 8- #6 14" Return Hose 4- 3/8 to #6 Straight 4- Italian Dumps 12- 3/8 to #6 Elbow 2- Standard Cups (pair) 12- Solenoids 2- Donuts (pair) * Upgrades are Available * 4- Parker 3/8" Male

Competition Kits

This One Pump "Front" Competition Kit consists of: 1- CCE Competition Pump **Chrome** 1- Donut (pair) 1- CCE Single Dump Assembly 1- #6 #6 #6 Tee 1- 8" Competition Cylinders (pair) 2- 3/8 to #6 Elbow 1- #6 15ft. Hose 1- 3 Prong Switch 1- #6 4ft. Hose 13- CCE 9 Wire Switch Cord 1- #6 3ft. Hose 3- Solenoids 1- Standard Cup (pair) * Upgrades are Available *
This is a one pump, one dump front up and down kit. This kit uses our competition pump and comes with components to make the kit work with vehicles that have standard coil spring suspension in the front. The kit can be easily adapted to fit any vehicle using the upgrades and options below.

Optional parts & Upgrades:
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 ton Pre-cuts Springs
For Installation on Torsion Bar equipped Mini Trucks (Mazdas, Toyotas, Isuzu, Nissan, etc.)
700.034 - 3/4 Ton Mini-Coils
710.730 - Mini Coil-over Cups
For Installation on Front Wheel Drive strut equipped vehicles.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600
and we can tell you exactly what you need.
Your Price: $499.95
FREE SHIPPING!

This One Pump "Rear" Competition Kit consists of: 1- CCE Competition Pump **Chrome** 1- Donut (pair) 1- CCE Single Dump Assembly 1- #6 #6 #6 Tee 1- 8" Competition Cylinders (pair) 2- 3/8 to #6 Elbow 1- #6 4ft. Hose 1- 3 Prong Switch 1- #6 3ft. Hose 13- CCE 9 Wire Switch Cord 1- Standard Cup (pair) 3- Solenoids * Upgrades are Available *
This is a one pump, one dump, one switch rear up and down kit. This kit uses our competition chrome pump and comes with suspension components to make the system work with standard coil dpring equipped vehicles. The kit can be easily adapted to any vehicle using the upgrades and option below.

Optional parts for Coil Spring Suspension:
800.402 - Upgrade to Coil-over Set-up
700.025 - 2 Ton Pre-cut Springs
also see Cylinder Upgrades
For Installation in leaf spring equipped vehicles with reverse offset wheels)
710.730 - Mini-coil over cups
700.034 - 3/4 ton Mini-coils
with standard offset wheels same as coil spring set-up
For Installation on Vehicles with Strut Suspension.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $499.95
FREE SHIPPING!

This 2 Pump Competition Kit consists of: 2- CCE Competition Pumps **Chrome** 2- Standard Cups (pair) 2- CCE Dual Dump Assembly 1- 10 Switch Pre-wired Box 2- 8" Competition Cylinders (pair) 2- Donuts (pair) 2- #6 15ft. Hose 4- 3/8 to #6 Elbow 1- #6 4ft. Hose 6- Solenoids 1- #6 3ft. Hose * Upgrades are Available *
This is a good kit if you want a fairly basic set-up but are looking for more power than a street pump can offer. The kit can do front, back, side to side and 3 wheel motion on both sides. The kit comes with components to fit standard coil spring equipped vehicles but can be easily adapted to any vehicle by using the upgrades and options listed below.

Upgrades for coil spring cars:
800.402 - Upgrade to Coil-over rear
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 Ton Pre-cut Springs
For Installation on an Import/Mini Truck: (with reversed offset wheels)
700.034 - 3/4 Ton Mini-CoilsHYPERLINK "/cce/Detailed/minicoil.htm" (2 pairs)
710.730 - Mini Coil-over Cups (2pairs)
also see Cylinder Upgrades
For Installation on an Import/Mini Truck: (with standard offset wheels)
800.402 - Upgrade rear cups to coil-over rear set-up
700.025 - 3/4 Ton Mini-coils
710.730 - Mini-Coil Over Cups
also see Cylinder Upgrades

For Installation on strut equipped vehicles:
700.034 - 3/4 Ton Mini-coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $999.95
FREE SHIPPING!

This 3 Pump Competition Kit consists of: 3- CCE Competition Pumps **Chrome** 2- Standard Cups (pair) 1- CCE Dual Dump Assembly 1- 10 Switch Pre-wired Box 2- CCE Single Dump Assembly 2- Donuts (pair) 2- 8" Competition Cylinders (pair) 4- 3/8 to #6 Elbow 2- #6 15ft. Hose 9- Solenoids 1- #6 4ft. Hose * Upgrades are Available *
This is a 3 pump, 4 dump, chrome kit using our competition pumps. This is a very versatile kit that can be used in a few different ways successfully. On vehicles requiring a chainbridge to 3 wheel (Cutlass, Regal, Monte Carlo, Malibu, El Camino, Town Car, Cadillac, Caprice, etc) this kit works well. In this configuration it will go on 3 very easily and still be able to get a good single pump hop. On cars that do not need a chainbridge to 3 wheel, (58-69 impalas, etc) you can run double pump to the front to hop and still run one pump to the rear. The kit is most populary used on and comes with components for full size, rwd, coil spring equipped vehicles. The kit can easily be adapted to any vehicle by using the upgrades and options listed below.

This 4 Pump Competition Kit consists of: 4- CCE Competition Pumps **Chrome** 2- Standard Cups (pair) 4- CCE Single Dump Assembly 1- 10 Switch Pre-wired Box 2- 8" Competition Cylinders (pair) 2- Donuts (pair) 2- #6 15ft. Hose 4- 3/8 to #6 Elbow 1- #6 4ft. Hose 12- Solenoids 1- #6 3ft. Hose * Upgrades are Available *
If you are looking for the look and control of a 4 pump kit but need more power than the street pumps can provide, this is an excellent kit for you. This kit will provide you with competition performance will still remaining very economical. The kit comes equipped with components to install on full-size, rwd, coil spring equipped vehicles but can be easily adapted to work with any vehicle using the upgrades and options listed below.

Fatboy Kits

This One Pump "Front" Fatboy Kit consists of: 1- CCE Fatboy Pump **Chrome** 1- Parker 1/2" Female 1- 8" Competition Cylinders (pair) 1- 3/8M to 1/2M Straight Fitting 1- #6 15ft. Hose 1- 3/8M to 3/8F to 3/8F Tee 1- #6 4ft. Hose 1- 3/8 Plug 1- #6 3ft. Hose 1- 1/4 to #6 Straight 1- #6 14" Return Hose 3- 3/8 to #6 Elbow 1- Italian Dump 1- 3 Prong Switch 1- Standard Cup (pair) 13- CCE 9 Wire Switch Cord 1- Donut (pair) 3- Solenoids 1- 1/2M to 1/2M Elbow * Upgrades are Available *
This is a one pump, one dump, one switch kit front only kit featuring our fatboy pump. To reduce flow restriction the kit also comes with a fatboy single dump assembly which utilizes all 1/2" plumbing. The kit comes complete with everything needed to install the kit (excluding springs and batteries) on standard coil-spring equipped vehicles. This kit can be adapted to your needs (or vehicle) by using the upgrades and options listed below.

Optional parts & Upgrades:
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 ton Pre-cuts Springs
For Installation on Torsion Bar equipped Mini Trucks (Mazdas, Toyotas, Isuzu, Nissan, etc.)
700.034 - 3/4 Ton Mini-Coils
710.730 - Mini Coil-over Cups
For Installation on Front Wheel Drive strut equipped vehicles.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $599.95
FREE SHIPPING!

This One Pump "Rear" Fatboy Kit consists of: 1- CCE Fatboy Pump **Chrome** 1- 3/8M to 3/8F to 3/8F Tee 1- 8" Competition Cylinders (pair) 1- 3/8 to #6 Straight 1- #14ft. Hose 2- 3/8 to #6 Elbow 1- #6 4ft. Hose 1- Parker 1/4" Competition 1- #6 3ft. Hose 1- 1/4 to #6 Straight 1- #6 14" Return Hose 1- #6 #6 #6 Tee 1- Italian Dump 1- 3/8 Plug 1- Standard Cup (pair) 1- 1/4M to 3/8M Straight 1- Donut (pair) 3- 3/8 to #6 Elbow 1- 1/2M to 1/2M Elbow 1- 3 Prong Switch 1- Parker 1/2" Female 13- CCE 9 Wire Switch Cord 1- 3/8M to 1/2M Straight Fitting 3- Solenoids * Upgrades are Available *
This is a one pump, one dump, one switch kit rear only kit featuring our fatboy pump. To reduce flow restriction the kit also comes with a fatboy single dump assembly which utilizes all 1/2" plumbing. The kit comes complete with everything needed to install the kit (excluding springs and batteries) on standard coil-spring equipped vehicles. This kit can be adapted to your needs (or vehicle) by using the upgrades and options listed below.

Optional parts & Upgrades:
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 ton Pre-cuts Springs
For Installation on Torsion Bar equipped Mini Trucks (Mazdas, Toyotas, Isuzu, Nissan, etc.)
700.034 - 3/4 Ton Mini-Coils
710.730 - Mini Coil-over Cups
For Installation on Front Wheel Drive strut equipped vehicles.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $599.95
FREE SHIPPING!

This 2 Pump Fatboy Kit consists of: 2- Fatboy Pumps **Chrome** 4- Regular Cups (pair) 4- 8" Competition Cylinders (pair) 4- Donuts (pair) 4- Italian Dumps 6- Solenoids 1- 10 Switch Pre-wired Box 8- 3/8 to #6 Elbow 4- 1/2 Comp. Check Valves 2- 1/2 to 1/2 to 1/2 Tee 2- 3/8 Comp. Slowdown 4- 1/2 to 3/8 Straight 2- 15' #6 Parker Hose 2- 3/8 to 3/8 Elbows 1- 3' #6 Parker Hose 2- 3/8 to #6 to #6 Tee 1- 4' #6 Parker Hose 4- 3/8 to #6 Straight 4- #6 Parker Return Hose * Upgrades are Available *
This is a 2 pump, 4 dump kit using our fatboy pumps. For less restriction and greater flow, this kit includes 2 dual fatboy dump assemblies which utilize all 1/2 plumbing. This kit is complete and comes with everything you need (excluding coil-springs and batteries) to install it on a standard coil-spring equipped vehicle. This kit can easily be adapted to your needs (or vehicle) by using the upgrades and options listed below.

This 3 Pump Fatboy Kit consists of: 3- Fatboy Pumps **Chrome** 1- 10 Switch Pre-wired Box 1- CCE Dual Dump Assembly 2- Standard Cups (pair) 2- CCE Single Dump Assembly 2- Donuts (pair) 2- 8" Competition Cylinders (pair) 4- 3/8 to #6 Elbow 2- #6 15ft. Hose 9- Solenoids 2- #6 4ft. Hose * Upgrades are Available *
This is a 3 pump, 4 dump setup using our fatboy pumps. This setup uses our fatboy dump assemblies which utilize all 1/2 plumbing. The 3 pump configuration allows you to run 2 pumps to the rear for power 3 wheel or 2 "to the nose" for serious hopping power. The kit comes complete (excluding coil springs and batteries) with suspension components for standard coil spring equipped vehicles but can easily be adapted to your needs (or vehicle) by using the upgrades and options listed below.

This 4 Pump Fatboy Kit consists of: 4- CCE Fatboy Pumps **Chrome** 4- Parker 1/2" Female 2- 8" Competition Cylinders (pair) 4- 3/8M to 1/2M Straight Fitting 2- #6 15ft. Hose 4- 1/4 to #6 Straight 2- #6 4ft. Hose 4- 3/8 Plug 4- #6 14" Return Hose 4- 3/8M to 3/8F to 3/8F Tee 4- Italian Dumps 4- 3/8 to #6 Straight 2- Standard Cups (pair) 4- 1/4M to 3/8M Straight 2- Donuts (pair) 8- 3/8 to #6 Elbow 1- 10 Switch Pre-wired Box 12- Solenoids Parker 1/4" Competition * Upgrades are Available * 4- 1/2M to 1/2M Elbow
This is a 4 pump, 4 dump kit using our exclusive fatboy pumps and fatboy dump assemblies. The pressure ports in the fatboy pump, as well as the plumbing in the fatboy dump assembly are 1/2". This is the ultimate fatboy kit. Whether your wanting to hop, 3 wheel, or just show this is a great kit for you. The kit comes complete with everything you need for a standard coil spring equipped vehicle (excluding springs and batteries). The kit can be adapt to your needs (or vehicle) by using the upgrades and options listed below.

Fuerte Kits

The One Pump "Front" Fuerte Kit consists of: 1- CCE Fuerte Pump **Chrome** 2- #16 nut 1- 8" Competition Cylinders (pair) 1- #12 to #12 to #12 Tee 1- 10 Switch Pre-wired Box 1- 3/8M to #8 Swivel 1- #6 15ft. Hose with #12 ends 1- Italian Dump 2- #6 4ft. Hose with #12 ends 2- 3/8 Plug 1- #6 14" Return Hose 1- 1/4M to 3/8M Straight 1- Standard Cup (pair) 1- Parker 1/4 Street 1- Donut (pair) 1- 1/4 to #6 Straight 1- 1"M to 1"M elbow 2- 3/8M to #12 90 1- Parker 1" Female 1- 3/8 to #6 Elbow 1- 1"M to #16 to #16 3- Solenoids 1- #16 to #12 nipple sleeve * Upgrades are Available * 1- #16 to #8 nipple sleeve
This is a one pump, one dump, front only kit. This kit utilizes our Fuerte pump (1" Pressure port, #13 Marzocchi pumphead, competition motor, etc.) and specially design fuerte single dump assembly (1" fittings and check valves). This allows the kit to build a lot of pressure for front hopping action. The kit is designed to work with standard coil spring equipped vehicles but can be adapted to any vehicle using the options and upgrades listed below.

Optional parts & Upgrades:
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 ton Pre-cuts Springs
For Installation on Torsion Bar equipped Mini Trucks (Mazdas, Toyotas, Isuzu, Nissan, etc.)
700.034 - 3/4 Ton Mini-Coils
710.730 - Mini Coil-over Cups
For Installation on Front Wheel Drive strut equipped vehicles.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $699.95
FREE SHIPPING!

The One Pump "Rear" Fuerte Kit consists of: 1- CCE Fuerte Pump **Chrome** 1- #16 to #8 Nipple Sleeve 1- 8" Competition Cylinders (pair) 2- #16 Nut 3- #8 4ft. Hose with #12 ends 1- 3/8M to #8 Swivel 1- #6 14" Return Hose 1- Italian Dump 1- Standard Cup (pair) 2- 3/8 Plug 1- Donut (pair) 1- 1/4M to 3/8M Straight 1- 1"M to 1"M Elbow 1- Parker 1/4 Street 1- Parker 1" Female 2- 3/8M to #12 90 1- 1"M to #16 to #16 1- 3/8 to #6 Elbow 1- #12 to #12 to #12 Tee 3- Solenoids 1- #16 to #12 Nipple Sleeve * Upgrades are Available *
This is a one pump, one dump, one switch, rear only kit. This kit uses our fuerte pump (#13 Marzocchi pumphead, 1" ported block, competition motor) and fuerte single dump assembly (1" fittings and check valve) for the best possible performance. The kit is designed to be installed on vehicles equipped with coil spring rear suspension but can be easily adapted using the options and upgardes listed below.

The 2 Pump Fuerte Kit consists of: Description: The Fuerte has 1" Pressure Port, Aluminum Block, 3/8 Side
Return Port with Marzocchi Pumphead with cast iron covers, 1" backing plate. 2- CCE Fuerte Pumps **Chrome** 4- 1"M to #16 to #16 2- 8" Competition Cylinders (pair) 4- #16 to #12 Nipple Sleeve 2- #8 15ft. Hose w/ #12 ends 4- #16 to #8 Nipple Sleeve 2- #8 4ft. Hose w/ #12 ends 4- 3/8M to #8 Swivel 4- #6 14" Return Hose 8- #16 Nut 2- Standard Cups (pair) 4- 3/8M to #12 90 2- Donuts (pair) 4- 1/4M to 3/8M Straight 1- 10 Switch Pre-wired Box 4- Parker 1/4 Slowdown Valve 4- Italian Dumps 4- 1/4 to #6 Straight 6- Solenoids 4- 3/8 to #6 Elbow 2- 1"M to 1"F to 1"F Tee 4- 3/8 Plug 4- 1"M to 1"M Elbow * Upgrades are Available * 4- Parker 1" Female
This is 2 pump, 4 dump, kit featuring our Fuerte pump. This kit not only includes 2 very powerful Fuerte pumps but also 2 Fuerte dump assemblies with all 1" plumbing. To keep the oil flowing freely throughout the entire system, this kit comes standard with #8 hoses with #12 ends on them. The kit comes complete (excluding coil springs and batteries) with all needed parts for installation on standard coil spring equipped vehicles. This kit can be personalized to your needs (or vehicles) by using the options and upgrades listed below.

The 3 Pump Fuerte Kit consists of: 3- CCE Fuerte Pumps **Chrome** 3- 1"M to #16 to #16 2- #8 15ft. Hose with #12 ends 3- #16 to #12 Nipple Sleeve 3- #8 4ft. Hose with #12 ends 3- #16 to #8 Nipple Sleeve 3- #6 14" Return Hose 8- #16 Nut 2- Standard Cups (pair) 1- #12 to #12 to #12 Tee 2- Donuts (pair) 4- 3/8 Plug 2- 8" Competition Cylinders (pair) 3- 1/4M to 3/8M Straight 1- 10 Switch Pre-wired Box 3- Parker 1/4 Street 4- 1"M to 1"M Elbow 3- 1/4 to #6 Straight 4- Parker 1" Female 3- 3/8 to #6 Elbow 1- 1"M 1"F 1"F Tee 4- 3/8M to #12 90 3- 1"M to 1"M Elbow 9- Solenoids 3- Parker 1" Female * Upgrades are Available * 3- Italian Dumps
This is a 3 pump, 4 dump, kit featuring our Fuerte pump. This kit not only comes with 3 very powerful fuerte pumps, but also 2 single and 1 dual Fuerte dump assemblies. The Fuerte dump assemblies feature all 1" plumbing to allow the best possible flow from the pump to the cylinders, the kit includes #8 hoses with #12 ends. This kit is an excellent choice for those of you that wish to run 2 pumps "to the nose" or run 2 to the rear for power 3 wheel. This kit comes complete (excluding springs and batteries) with all parts needed for installation on standard coil spring equipped vehicles. This kit can easily be adapted to your needs (or vehicle) by using the options and upgrades listed below.

The 4 Pump Fuerte Kit consists of: 4- CCE Fuerte Pumps **Chrome** 4- #16 to #12 Nipple Sleeve 2- #8 15ft. Hose with #12 ends 4- #16 to #8 Nipple Sleeve 2- #8 4ft. Hose with #12 ends 8- #16 Nut 4- #6 14" Return Hose 4- 3/8M to #8 Swivel 2- Standard Cups (pair) 4- 1/4M to 3/8M Straight 2- Donuts (pair) 4- Parker 1/4 Street 2- 8" Competition Cylinders (pair) 4- 1/4 to #6 Straight 1- 10 Switch Pre-wired Box 4- 3/8 to #6 Elbow 4- Italian Dumps 4- 3/8M to #12 90 4- 1"M to 1"M Elbow 12- Solenoids 4- Parker 1" Female * Upgrades are Available * 4- 1"M to #16 to #16
This is a 4 pump, 4 dump hydraulic kit featuring our Fuerte pump. This is our absolute top of the line kit. This kit can do any move you can imagine on your car. The performance of the Fuerte pumps is enhanced by the Fuerte dump assemblies which feature all 1" plumbing. This kit also includes all #8 hoses with #12 ends. The kit comes complete with everything needed for installation (excluding coil springs and batteries) on standard coil spring equipped vehicles. The kit can easily be adapted to your needs (or vehicle) by adding the upgrades and options below.

Street Edition Kits

- CCE Street Edition Pumps **Chrome** 2- 8" Competition Cylinders (pair) 2- CCE Dual Dump Assembly 1- 10 Switch Pre-wired Box 2- #6 15ft. Hose 2- Donuts (pair) 1- #6 4ft. Hose 2- Standard Cups (pair) 1- #6 3ft. Hose 6- Solenoids 4- 3/8 to #6 Elbow * Upgrades are Available *
This kit will enable you to do front, back, sides & three-wheel motion on a standard coil spring equipped vehicle.
This can be adapted to any vehicle using the components listed below in the optional parts and upgrades

Upgrades for coil spring cars:
800.402 - Upgrade to Coil-over rear
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 Ton Pre-cut Springs
For Installation on an Import/Mini Truck: (with reversed offset wheels)
710.310 - Upper Truck Brackets
710.320 - Lower Truck Brackets
700.034 - 3/4 Ton Mini-CoilsHYPERLINK "/cce/Detailed/minicoil.htm" (2 pairs)
710.730 - Mini Coil-over Cups (2pairs)
also see Cylinder Upgrades
For Installation on an Import/Mini Truck: (with standard offset wheels)
800.402 - Upgrade rear cups to coil-over rear set-up
700.025 - 3/4 Ton Mini-coils
710.730 - Mini-Coil Over Cups
also see Cylinder Upgrades

This 3 Pump Street Edition Kit consists of:3- CCE Street Edition Pumps**Chrome** 2- 8" Competition Cylinders (pair) 1- CCE Dual Dump Assembly 1- 10 Switch Pre-wired Box 2- CCE Single Dump Assembly 2- Donuts (pair) 2- #6 15ft. Hose 2- Standard Cups (pair) 2- #6 4ft. Hose 9- Solenoids 4- 3/8 to #6 Elbow * Upgrades are Available *
This is an 3 pump, 4 dump, chrome street kit. If you have a car that requires a chainbridge to stand 3 wheel, this is an excellent choice for you. The kit comes with standard cups for front and rear but can be easily adapted for any configuration or any suspension using the upgrades and options listed below.
Upgrades for coil spring cars:
800.402 - Upgrade to Coil-over rear
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 Ton Pre-cut Springs
For Installation on an Import/Mini Truck: (with reversed offset wheels)
700.034 - 3/4 Ton Mini-CoilsHYPERLINK "/cce/Detailed/minicoil.htm" (2 pairs)
710.730 - Mini Coil-over Cups (2pairs)
also see Cylinder Upgrades
For Installation on an Import/Mini Truck: (with standard offset wheels)
800.402 - Upgrade rear cups to coil-over rear set-up
700.025 - 3/4 Ton Mini-coils
710.730 - Mini-Coil Over Cups
also see Cylinder Upgrades

This 4 Pump Street Edition Kit consists of: 4- CCE Street Edition Pumps **Chrome** 2- Donuts (pair) 4- CCE Single Dump Assembly 1- 10 Switch Pre-wired Box 4- 3/8 to #6 Elbow 2- Standard Cups (pair) 2- #6 15ft. Hose 12- Solenoids 2- #6 4ft. Hose * Upgrades are Available * 2- 8" Competition Cylinders (pair)
This is a 4 pump, 4 dump system using our street edition pumps. If you are wanting the look and control of a four pump kit but don't want to go as for as a competition set-up, this is an excellent kit for you. The kit comes with suspension components for standard coil spring equipped vehicles.

Turbine Kits

The One Pump "Front" Turbine Kit consists of: 1- CCE Turbine Pump **Chrome** 2- 1/4 to #6 Straight 1- 8" Competition Cylinders (pair) 2- 3/8M to 3/8M Elbow 2- #6 15ft. Hose 2- 3/8F to 3/8M to 3/8M Tee 2- #6 14ft. Hose 2- 3/8 Plug 2- Italian Dumps 2- 3/8 to #6 Straight 1- Standard Cup (pair) 4- 3/8 to #6 Elbow 1- Donut (pair) 3- Solenoids 2- Parker 3/8" Female * Upgrades are Available * 2- Parker 1/4" Competition
This is a very unique front only kit that has "side to side" capabilities. This is due to the unique dual pressure/dual return block design. If you are planning to do one end of your car and then eventually upgrade to a 2 pump, this is the kit for you. The kit comes with suspension components for standard coil-spring equipped vehicles but can be easily adapted to any car using the upgrades and options listed below.

Optional parts & Upgrades:
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 ton Pre-cuts Springs
For Installation on Torsion Bar equipped Mini Trucks (Mazdas, Toyotas, Isuzu, Nissan, etc.)
700.034 - 3/4 Ton Mini-Coils
710.730 - Mini Coil-over Cups
For Installation on Front Wheel Drive strut equipped vehicles.
800.650 - Upgrade 8" Cyl. to 6" Rev. Flow Cyl.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $649.95
FREE SHIPPING!

The One Pump " Rear" Turbine Kit consists of: 1- CCE Turbine Pump **Chrome** 2- 1/4 to #6 Straight 1- 8" Competition Cylinders (pair) 2- 3/8M to 3/8M Elbow 2- #6 4ft. Hose 2- 3/8F to 3/8M to 3/8M Tee 2- #6 14" Return Hose 2- 3/8 Plug 2- Italian Dumps 2- 3/8 to #6 Straight 1- Standard Cup (pair) 4- 3/8 to #6 Elbow 1- Donuts (pair) 2- 1/4M to 3/8M Straight 2- Parker 3/8" Female 3- Solenoids 2- Parker 1/4" Competition * Upgrades are Available *
This is a very unique rear only kit that has "side to side" capabilities. This is due to the unique dual pressure/dual return block design. If you are planning to do one end of your car and then eventually upgrade to a 2 pump, this is the kit for you. The kit comes with suspension components for standard coil-spring equipped vehicles but can be easily adapted to any car using the upgrades and options listed below.

Optional parts & Upgrades:
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 ton Pre-cuts Springs
For Installation on Torsion Bar equipped Mini Trucks (Mazdas, Toyotas, Isuzu, Nissan, etc.)
700.034 - 3/4 Ton Mini-Coils
710.730 - Mini Coil-over Cups
For Installation on Front Wheel Drive strut equipped vehicles.
800.650 - Upgrade 8" Cyl. to 6" Rev. Flow Cyl.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $649.95
FREE SHIPPING!

The 2 Pump Turbine Kit consists of: Description: The Turbine has dual pressure ports and dual return ports
on the sides of the block with a large competition Marzocchi pumphead. 2- CCE Turbine Pumps **Chrome** 4- Parker 1/4" Competition 2- 8" Competition Cylinders (pair) 4- 1/4 to #6 Straight 2- #6 15ft Hose 4- 3/8M to 3/8M Elbow 1- #6 4ft. Hose 4- 3/8F to 3/8M to 3/8M Tee 1- #6 3ft. Hose 4- 3/8 Plug 4- #6 14" Return Hose 4- 3/8 to #6 Straight 4- Italian Dumps 8- 3/8 to #6 Elbow 2- Standard Cups (pair) 4- 1/4M to 3/8M Straight 2- Donuts (pair) 6- Solenoids 1- 10 Switch Pre-wired Box * Upgrades are Available * 4- Parker 3/8" Female
This is a 2 pump, 4 dump kit using our Turbine pump. This is a complete kit, complete with all suspension and electrical parts (excluding springs and batteries) required for a standard coil spring equipped vehicle. The kit can easily be adapted using the upgrades listed below to work with any car. If you want a 2 pump set-up that won't look like everyone else set up, this is an excellent kit for you.

Upgrades for coil spring cars:
800.402 - Upgrade to Coil-over rear
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 Ton Pre-cut Springs
For Installation on an Import/Mini Truck: (with reversed offset wheels)
710.310 - Upper Truck Brackets
710.320 - Lower Truck Brackets
700.034 - 3/4 Ton Mini-CoilsHYPERLINK "/cce/Detailed/minicoil.htm" (2 pairs)
710.730 - Mini Coil-over Cups (2pairs)
also see Cylinder Upgrades
For Installation on an Import/Mini Truck: (with standard offset wheels)
800.402 - Upgrade rear cups to coil-over rear set-up
700.025 - 3/4 Ton Mini-coils
710.730 - Mini-Coil Over Cups
also see Cylinder Upgrades

For Installation on strut equipped vehicles:
700.034 - 3/4 Ton Mini-coils
800.650 - Upgrade 8" Cyl. to 6" Rev. Flow
800.850 - Upgrade 8" Cyl. to 8" Rev. Flow
NOTE: If you are unsure what type of suspension your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need.
Your Price: $1099.95
FREE SHIPPING!